Connecting To A Wireless Internet Network With Wps - Samsung LED 6400 Series E-Manual

Hide thumbs Also See for LED 6400 Series:
Table of Contents

Advertisement

51
In the
IP Settings
Mask, Gateway, and
Use one of the following methods to enter the numerical values.
Set the numbers using the
Using Samsung Smart Control: Press
Using the remote control: Enter the numbers directly using numerical button.
IP Settings
IP setting
IP Address
Subnet Mask
Gateway
DNS setting
DNS Server
OK
61
The TV attempts to connect to the network again using the specified settings. A confirmation
message appears once a connection is established. Select OK.
"
The network connection speed may differ depending on the DNS server settings.
"
For details on the DNS server settings, contact the Internet service provider (ISP).

Connecting to a Wireless Internet Network with WPS

Network
>
Network Settings
With wireless routers that support WPS (Wi-Fi Protected Setup) or PBC (Push Button Configuration),
it's possible to press a button on the router to connect the TV to the Internet.
"
This functionality is not available with wireless routers that do not support WPS. Check to see if your
wireless router supports WPS.
11
Setting the
Network Type
21
Select
WPS(PBC)
minutes.
31
The TV exchanges the network name (SSID) and security key automatically and then attempts to
connect to the Internet. A confirmation message appears once a connection is established. Select
OK.
screen, set the
IP setting
DNS Server
values, and then select OK.
u
and
Enter manually
0.0.0.0
0.0.0.0
0.0.0.0
Enter manually
0.0.0.0
Cancel
to
Wireless
and then press the WPS or PBC button located on the wireless router within two
to
Enter
manually, enter the
d
buttons.
KEYPAD
button and enter the numbers directly.
automatically displays a list of available wireless networks.
IP
Address,
Subnet

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6500 seriesUa55hu7000w

Table of Contents