Connecting To A Wireless Internet Network Manually - Samsung KR-X14ATSCH-1 E-Manual

Connecting to a Wireless Internet Network Manually

Network Network Settings
>
With networks that require a static IP address, you will need to enter the IP address, subnet mask,
gateway, and DNS values manually to connect to the network. To get the IP address, subnet mask,
gateway and DNS values, contact your Internet Service Provider (ISP).
"
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP
addresses.
1.
Network Settings
On the
list of available wireless networks.
Network Settings
Select your network type.
Network type
Wireless Network
AP0000
AP0001
Add Network
Refresh
2.
Select a network (SSID). If the network you want doesn't appear in the list, select
and enter the network's SSID manually.
3.
Using the on-screen keyboard that appears, enter the security key. When finished, select Done.
If the selected network is not security-enabled, the TV will by-pass the on-screen keyboard and
attempt to connect right away.
4.
Stop
Select when the TV attempts to connect to the network. Once the network connection has
been interrupted, select
Network Settings
Connection verification cancelled.
Wireless network connection test is stopped.
Change Network
Network type
screen, set
Wireless
WPS(PBC)
IP Settings.
IP Settings Retry
to Wireless. The TV automatically displays a
You can connect your TV to
the internet. Please select
which wireless network to
use.
Close
Add Network,