Intermec CK30 User Manual page 63

b Press Enter. Once the radio starts to authenticate, the
c Enter a User Name and Password and select the Save
d (Optional) In the Domain field, enter the domain that
e Press Enter. You return to the Communications menu.
7 Exit the Configuration Utility.
To enable WPA-PSK security on your CK30
1 Press C and then B to open the System Main Menu.
2 Choose Configuration Utility > Communications > 802.11
Radio > Security.
3 For Network Authentication, choose WPA-PSK.
4 For Network Key Value, enter a pass phrase or pre-shared
key.
The pass phrase must be a value between 8 to 63 ASCII
characters. The pre-shared key must be a value of 32 Hex
pairs. The pre-shared key must be preceded by 0x. The value
must match the key value on the access point.
5 Exit the Configuration Utility.
CK30 Handheld Computer User's Manual
Network Password dialog box appears:
Password checkbox.
you need to access to obtain the certificates.
Chapter 2 — Configuring the CK30
51