Intermec CK30 User Manual page 62

Chapter 2 — Configuring the CK30
To use WPA security, you need:
• An authentication server
Note: You can also use a MobileLAN access point with
software release 1.80 or later as an authentication server. For
help, see the MobileLAN access System Manual (P/N 067150).
• An access point with an 802.11b/g radio that supports WPA
• CK30 with the 802.11b/g radio and the 802.1x/WPA
security option
To enable WPA security on your CK30
1 Make sure you have configured the communications and
radio parameters on your CK30.
2 Press C and then B to open the System Main Menu.
3 Choose Configuration Utility > Communications > 802.11
Radio > Security.
4 For Network Authentication, choose WPA.
5 For Data Encryption, choose TKIP.
6 For 802.1x Authentication, choose either TLS or PEAP.
If you choose TLS:
a Select Properties and choose the Select button.
b Select your certificate from the list and press Enter.
If you choose PEAP:
a Select Properties and clear the Validate Server checkbox
50
by tabbing to it and then pressing V.
CK30 Handheld Computer User's Manual