Intermec CK30 User Manual page 36

Chapter 1 — Using the CK30 Handheld Computer
To attach a tethered scanner
1 Locate and remove the scanner port cover.
2 Insert the scanner 10-pin connector until it locks in place.
3 Configure the Scanner Model command and select the
tethered device connected to the CK30. There are several
ways to configure the scanner model:
• Use the Configuration Utility. From the System Main
• Use one of the configuration methods discussed in "How
4 Modify any scanner commands necessary to meet your needs.
Use the Configuration Utility or one of the configuration
methods discussed on page 28.
24
To scanner
Menu, choose Configuration Utility > Scanners,
Symbologies > CK30 Tethered Scanner > Scanner
Model.
to Configure the CK30 Parameters" on page 28.
CK30 Handheld Computer User's Manual
Scanner
port cover
Scanner port