Intermec CK30 User Manual page 59

If devices are discovered, but your device is not displayed in the
box, make sure your device and radio are turned on and try
device discovery again.
Use this table to understand the commands you see in the
Bluetooth menu.
Bluetooth Commands
Command
Remote Device Name
Remote Device Address
Set Printer (Device Discovery)
Set Printer (Device Manager)
Bluetooth Device Name
Device Address
Discoverable
Connectable
Class of Device
Apply Bluetooth Changes
For more information on using Bluetooth communications, see
the Wireless Printing Development Guide available on the
Intermec Developer's Library CD (P/N 235-114-001) or the
Intermec web site.
CK30 Handheld Computer User's Manual
Chapter 2 — Configuring the CK30
Description
Displays the name of the remote
Bluetooth printer.
Displays the network address of the
Bluetooth compatible printer.
Discovers Bluetooth compatible devices.
Allows you to pick from printer
information saved during earlier device
discoveries.
Displays the name assigned to your
CK30.
Displays the network address of your
CK30.
Allows other Bluetooth devices to be able
to discover your CK30 during a device
discovery.
Allows other Bluetooth devices to
connect to your CK30.
Determines how the device appears to
other devices during discovery.
Saves changes made to the Discoverable
and Connectable commands. If you do
not select Apply Bluetooth changes, the
changes are made the next time you turn
the CK30 off and on or perform a warm
boot.
47