Parallel Ringing - Aastra DT412 User Manual

*21* å #
DT412/DT422/DT432

Parallel Ringing

The Parallel Ringing function makes it possible for an incoming call
to ring several phones simultaneously and for the call to be
answered on any of the phones. The main advantage of this
function is that you do not risk losing any calls.
The function requires all the phones involved to be defined in a
Parallel Ringing list, which must be configured and initiated by
your system administrator. Because only calls to a main extension
will be distributed among the phones in the list, this main extension
also needs to be defined.
A call to a specific extension will not be distributed to other phones
in the list, and will only ring that specific extension's phone.
Parallell Ringing can be temporarily disabled by the phone user
using the function "Internal Follow-me". See also section
Follow-me" on page 63.
To disable Parallel Ringing temporarily
Dial, enter the extension number and press.
Note: U.K., dial
æ
Press.
Wait for the call icon to stop flashing.
æ
Press to finish the procedure.
If you want to disable Parallel Ringing for all phones defined in the
list, follow the procedure for disabling the function from the phone
with the main extension number and enter the number of the
answering position.
If you want to disable Parallel Ringing for one specific phone in the
list only, follow the procedure for disabling the function from this
phone and enter its extension number.
* 2 * #
Number .
Incoming Calls
"Internal
35