Maintenance; Service - Delta TS350 Instruction Manual

KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp
cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.
Wear certified safety equipment for eye, hearing and respiratory protection while using compressed air.
FAILURE TO START
Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the
outlet. Also, check for blown fuses or open circuit breakers in the line.
LUBRICATION & RUST PROTECTION
Apply household floor paste wax to the machine table, extension table or other work surface weekly. Or use a commercially
available protective product designed for this purpose. Follow the manufacturer's instructions for use and safety.
To clean cast iron tables of rust, you will need the following materials: a sheet of medium Scotch-Brite™ Blending Hand
Pad, a can of WD-40 ® and a can of degreaser. Apply the WD-40 and polish the table surface with the Scotch-Brite pad.
Degrease the table, then apply the protective product as described above.
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our website at servicenet.deltamachinery.com. You
can also order parts from your nearest factory-owned branch, or by calling our Customer Care Center at 1-800-223-7278 to
receive personalized support from highly-trained technicians.
FREE WARNING LABEL REPLACEMENT
If your warning labels become illegible or are missing, call 1-800-223-7278 for a free replacement.
FOR YOUR OWN SAFETY READ AND UNDERSTAND INSTRUCTION
MANUAL BEFORE OPERATING TABLE SAW. ALWAYS WEAR PROPER EYE
AND RESPIRATORY PROTECTION. ALWAYS USE BLADE GUARD AND
SPLITTER FOR EVERY OPERATION FOR WHICH IT CAN BE USED,
INCLUDING ALL THROUGH SAWING. KEEP HANDS OUT OF PATH OF THE
LINE OF THE SAW BLADE. USE PUSH STICK WHEN REQUIRED. DO NOT
PERFORM ANY OPERATION FREE HAND. USE FENCE WHEN RIPPING
AND MITER GAGE WHEN CROSS-CUTTING. NEVER USE THE MITER
GAUGE AND RIP FENCE TOGETHER. KNOW HOW TO AVOID RISK OF
KICKBACK. NEVER REACH IN BACK OF OR OVER SAW BLADE. DO NOT
REMOVE JAMMED OR CUT-OFF PIECES UNTIL BLADE HAS STOPPED.
DISCONNECT MACHINE FROM POWER SOURCE BEFORE MAKING
REPAIRS OR ADJUSTMENTS. DO NOT EXPOSE TO RAIN OR USE IN DAMP
LOCATIONS. WHEN USING THIS TOOL, DO NOT WEAR GLOVES,
NECKTIES, JEWELRY OR LOOSE CLOTHING. WEAR PROTECTIVE HAIR
COVERING TO CONTAIN LONG HAIR. TIGHTEN THE BLADE ARBOR NUT
SECURELY BEFORE OPERATING. DO NOT USE THE MACHINE WHEN YOU
ARE TIRED OR UNDER THE INFLUENCE OF DRUGS, ALCOHOL OR
MEDICATION. DO NOT OPERATE SAW WITH THE FOOT LEVER CASTER IN
THE DOWN POSITION. FAILURE TO FOLLOW THESE SAFETY RULES MAY
RESULT IN SERIOUS PERSONAL INJURY.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information about Delta Machinery, its factory-
owned branches, or an Authorized Warranty Service Center, visit our website at www.deltamachinery.com or call our Customer
Care Center at 1-800-223-7278. All repairs made by our service centers are fully guaranteed against defective material and
workmanship. We cannot guarantee repairs made or attempted by others.
You can also write to us for information at Delta Machinery, 4825 Highway 45 North, Jackson, Tennessee 38305 - Attention:
Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial number,
etc.)

MAINTENANCE

SERVICE

PARA SU PROPIA SEGURIDADLEA Y COMPRENDA EL MANUAL DE
INSTRUCCIONES ANTES DE UTILIZAR LA SIERRA DE MESA. SIEMPRE SE
DEBERÁ LLEVAR LA PROTECCIÓN APROPIADA PARA LA VISTA Y PARA LAS
VÍAS RESPIRATORIAS. UTILICE SIEMPRE EL ENSAMBLE DEL PROTECTOR DE
LA HOJA Y EL HENDEDOR PARA CUALQUIER OPERACIÓN EN LA QUE SE
PUEDA UTILIZAR, INCLUIDOS TODOS LOS CORTES CON SIERRA. MANTENGA
LAS MANOS ALEJADAS DEL TRAYECTO DE LA HOJA DE LA SIERRA. UTILICE LA
VARA PARA EMPUJAR CUANDO SEA NECESARIO. NO REALICE NINGUNA
OPERACIÓN SIN USAR LAS MANOS. UTILICE LA GUÍA DE CORTE
CONJUNTAMENTE. SEPA CÓMO EVITAR EL RIESGO DE RETROCESOS. NUNCA
SE ESTIRE PARA ALCANZAR ALGO DETRÁSO SOBRE LA HOJA DE LA SIERRA.
NO RETIRE PIEZAS ATASCADAS O CORTADAS HASTA QUE LA HOJA SE HAYA
DETENIDO. DESCONECTE LA MÁQUINA DE LA FUENTE DE ENERGÍA ANTES DE
REALIZAR REPARACIONES O AJUSTES. NO EXPONGA A LA LLUVIA NI UTILICE
EN LUGARES HÚMEDOS. NO UTILICE GUANTES, CORBATAS ALHAJAS NI ROPA
HOLGADA CUANDO USE ESTA HERRAMIENTA. SI TIENE EL CABELLO LARGO,
RECÓJALO Y CÚBRALO. AJUSTE BIEN LA TUERCA DE EJE DE LA HOJA ANTES
DE OPERAR LA UNIDAD. NO UTILICE LA MÁQUINA SI ESTÁ CANSADO, O BAJO
EL EFECTO DE DROGAS, ALCOHOL O MEDICAMENTOS. NO OPERE LA SIERRA
CUANDO LA RUEDA DE LA PATA NIVELADORA ESTÉ EN LA POSICIÓN HACIA
ABAJO. EL INCUMPLIMIENTO DE ESTAS NORMAS DE SEGURIDAD PUEDE
PROVOCAR DAÑOS PERSONALES GRAVES.
29 - English
POUR VOTRE PROPRE SÉCURITÉBIEN LIRE ET COMPRENDRE LE MODE D'EMPLOI
AVANT D'UTILISER LE BANC DE SCIE. IL FAUT TOUJOURS PORTER DE L'ÉQUIPEMENT
DE PROTECTION OCULAIRE ET RESPIRATOIRE APPROPRIÉ. TOUJOURS UTILISER UN
PARE-MAIN ET UN COUTEAU SÉPARATEUR POUR TOUTES LES OPÉRATIONS
DEMANDANT SON UTILISATION, Y COMPRIS TOUT DÉBITAGE COMPLET. GARDER LES
MAINS HORS DE LA TRAJECTOIRE DE LA LAME DE LA SCIE. UTILISER UN POUSSOIR
AU BESOIN. EFFECTUER TOUTE OPÉRATION EN TENANT L'OUTIL DES DEUX MAINS.
UTILISER LE GUIDE LONGITUDINAL POUR LE SCIAGE EN LONG ET LA JAUGE À
ONGLET POUR LE TRONÇONNAGE. NE JAMAIS UTLISER; A JAUGE À ONGLET ET LE
GUIDE LONGITUDINAL EN MÊME TEMPS. CONNAÎTRE LES TECHNIQUES POUR
EMPÊCHER LE RISQUE ASSOCIÉ À L'EFFET DE REBOND. NE JAMAIS PASSER LES
MAINS À L'ARRIÈRE OU AU-DESSUS DE LA LAME DE LA SCIE. NE PAS RETIRER LES
PIÈCES COUPÉES OU COINCÉES AVANT L'ARRÊT COMPLET DE LA LAME.
DÉBRANCHER LA MACHINE DE LA SOURCE D'ALIMENTATION AVANT D'EFFECTUER
DES RÉPARATIONS OU DES RÉGLAGES. NE PAS EXPOSER LA SCIE À LA PLUIE ET NE
PAS L'UTILISER DANS UN ENDRIOT HUMIDE. LORS DE L'UTILISATION DE CET OUTIL,
NE PAS PORTER NI GANT, NI CRAVATES, NI BIJOUX OU VÊTEMENTS AMPLES. SE
COUVRIR LES CHEVEUX S'ILS SONT LONGS. SERRER SOLIDEMENT L' ÉCROU D'AXE
DE LA LAME AVANT DE L'UTILISER. NE PAS UTILISER LA MACHINE EN CAS DE
FATIGUE OU SOUS L'INFLUENCE DE DROGUES, D'ALCOOL OU DE MÉDICAMENTS. NE
PAS UTILISER LA SCIE AVEC LA COMMANDE À PIEDS DES ROULETTES EN POSITION
BASSE. NÉGLIGER DE SUIVRE TOUS CES RÈGLES DE SÉCURITÉ PEUT ENTRAÎ.
A16048