Table of Contents
Advertisement
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
1-800-223-7278 (
please call
²
T
T²-30 (30" Capacity Fence System)
T²-50 (50" Capacity Fence System)
SHOWN WITH MODEL
36-729 CABINET SAW
In Canada call
Fence System
PART NO. 911978 - 04-29-05
Copyright © 2005 Delta Machinery
1-800-463-3582).
Advertisement
Table of Contents
Related Manuals for Delta T2-30
Summary of Contents for Delta T2-30
- Page 1 T²-50 (50" Capacity Fence System) SHOWN WITH MODEL 36-729 CABINET SAW PART NO. 911978 - 04-29-05 Copyright © 2005 Delta Machinery To learn more about DELTA MACHINERY visit our website at: www.deltamachinery.com. For Parts, Service, Warranty or other Assistance, 1-800-223-7278 ( 1-800-463-3582).
-
Page 2: Table Of Contents
NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the product until you have written Delta Machinery and we have advised you. -
Page 3: Safety Guidelines
SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. -
Page 4: General Safety Rules
TION MANUAL BEFORE OPERATING mended by Delta may cause damage to the MACHINE. Learning the machine’s application, machine or injury to the user. limitations, and specific hazards will greatly minimize the possibility of accidents and injury. -
Page 5: Functional Description
FUNCTIONAL DESCRIPTION The models T²-30 (30" capacity) and T²-50 (50" capacity) can be attached to the 36-729 Cabinet Saw, Delta 10" Professional Table Saws, Delta Contractors Saws, and Unisaws, in addition to other brands of table saws. The T² Fence System includes the fence, guide tube, front guide rail, and rear guide rail. -
Page 6: Front Guide Rail
FRONT GUIDE RAIL FOR MODEL 36-729 ONLY 1. Align the two holes in the front guide rail (A) Fig. 3 with the two holes in the front of the table. 2. Insert an M8-1.25 x 30mm flat head screw (B) Fig. 3 through the hole in the front guide rail and the table. -
Page 7: Rear Guide Rail
REAR GUIDE RAIL 1. Align the holes in the rear guide rail with the holes in the back of the saw table. FOR MODEL 36-729 ONLY 2. Insert a 3/8-24 x 1-1/4" hex head bolt (A) Fig. 7, with a 3/8" lockwasher through the hole in the rear guide rail. -
Page 8: Adjustments
ADJUSTMENTS ADJUSTING THE FENCE PARALLEL TO THE MITER GAUGE SLOTS DISCONNECT MACHINE FROM POWER SOURCE! To see if the fence is parallel to the miter gauge slot: 1. Move the fence (A) until the bottom edge of the fence is in line with the edge of one of the miter gauge slots. -
Page 9: Troubleshooting
Fig. 15 TROUBLESHOOTING For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582). MAINTENANCE FENCE LUBRICATION 1. Apply paste wax to the fence and the guide tube sliding surfaces weekly. -
Page 10: Service
SERVICE PARTS, SERVICE OR WARRANTY ASSISTANCE All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network • of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location... -
Page 11: Warranty
Two Year Limited New Product Warranty Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. -
Page 12: Delta Machinery
Fax: (519) 767-4131 Fax: (604) 420-3522 Fax: (514) 336-3505 The following are trademarks of PORTER-CABLE • DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE • DELTA): Auto-Set ®...