Usb Power Select; Power-On Select - DFI DL631-C226 User Manual

USB Power Select

1 2 3
1-2 On: +5V
USB 8-9
(default)
(JP4)
1 2 3
1-2 On: +5V
(default)
JP4, JP5, JP6 and JP8 are used to select the power of the USB devices. Selecting +5V_standby
will allow you to use a USB device to wake up the system.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
Chapter 2 Hardware Installation
1 2 3
2-3 On:
+5V_standby
3
2
1
USB 0-1
1-2 On: +5V
(JP5)
(default)
3
USB 4-5 2
(JP6)
1
2-3 On:
+5V_standby
USB 2-3/6-7
(JP8)
1 2 3
2-3 On:
+5V_standby
Chapter 2

Power-on Select

JP10 is used to select the method of powering on the system. If you want to use the power
button, set pins 1 and 2 to On.
To power-on via WOL after G3:
1. Set JP10 pins 2 and 3 to On.
2. Set the "After G3" field to Power Off/WOL.
3. Set the "GbE Wake Up From S5" to Enabled.
To power-on via AC Power:
1. Set JP10 pins 2 and 3 to On.
2. Set the "After G3" field to Power On.
16
3
2
1
1-2 On:
Power-on via power button
(default)
JP10
3
2
1
2-3 On:
Power-on via AC power;
Power-on via WOL after G3
www.dfi .com