Chapter 2 - Activating And Installing; Activating Your Wireless Account; Inserting The Sim Card Into Holder (If Required) - Multitech MultiModem Cell MTCBA-E1 User Manual

Activating Your Wireless Account

Refer to the wireless account Activation Notices included with your unit. Choose the notice for your wireless
network provider and follow the directions to activate your account.
Phone Numbers for the Wireless Modem
Every wireless modem has a unique phone number. Your wireless service provider may give you this number or it
might be included on the SIM care. Wireless provider implementations may vary.

Inserting the SIM Card into Holder (if required)

The MultiModem requires the power supply connection to begin operation. It also requires a SIM card (Subscriber
Identity Module) to operate on a GSM network. To install the SIM, do the following:
Using a small Phillips screwdriver, remove the two SIM door screws and remove the SIM door.
1.
Note: When changing a SIM, ensure that power is removed from the unit.
Insert the SIM card into the card holder. The above graphic illustrates the correct SIM card orientation.
2.
Verify that the SIM card fits into the holder properly and then replace the cover.
3.
16 MultiModem Cell User Guide