Using The "Options1" Menu; Checking The Lamp Life Status; Setting The Resize Mode - Sharp Notevision PG-MB60X Operation Manual

Using the "Options1" Menu

You can use the "Options1" menu to enhance the usage for the projector.
Checking the Lamp Life
Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Menu operation Page
Example: "Options1" screen menu for
INPUT 1 (RGB) mode
Description of Lamp Timer (Life)
Lamp usage condition
"Life"
Operated exclusively
in Eco mode ( )
Operated exclusively
in Standard mode ( )
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The table above indicates rough estimates in the
case of using only in each mode shown.
• Remaining lamp life changes within the range of
the values shown depending on the frequency at
which "Eco Mode" is switched to "
mode) and " " (Standard mode). (See page
51.)
• The lamp life may vary depending on the usage
condition.
42
Remaining lamp life
100% 5%
Approx. Approx.
3,000 hours 150 hours
Approx. Approx.
2,000 hours 100 hours
" (Eco

Setting the Resize Mode

Depending on the input signal, you can select
the screen image.
Menu operation Page
Example: "Options1" screen menu for
INPUT 1 (RGB) mode
Selectable items of Resize Modes
• Normal
• Border
• Dot By Dot*
• Stretch
* Item when inputting RGB signal through INPUT 1 or
INPUT 2
Note
• For details of the Resize mode, see pages
and 37.
• You can also press
set the resize mode. (See page 36.)
42
36
on the remote control to
-49