1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. Notevision PG-MB60X
  6. Operation manual

Sharp NoteVision PG-MB60X Operation Manual

Multimedia projector
Hide thumbs Also See for NoteVision PG-MB60X:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual

OPERATION MANUAL

MODEL
PG-MB60X
MULTIMEDIA PROJECTOR
Downloaded From projector-manual.com Sharp Manuals

Advertisement

Table of Contents
loading

Related Manuals for Sharp NoteVision PG-MB60X

Summary of Contents for Sharp NoteVision PG-MB60X

  • Page 1: Operation Manual

    OPERATION MANUAL MODEL PG-MB60X MULTIMEDIA PROJECTOR Downloaded From projector-manual.com Sharp Manuals...
  • Page 2 Before recycling the packaging, please ensure that you Serial No.: have checked the contents of the carton thoroughly against the list of “Supplied accessories” on page 10. Downloaded From projector-manual.com Sharp Manuals...
  • Page 3 The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. • The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN. Downloaded From projector-manual.com Sharp Manuals...
  • Page 4 O CD-ROM fornecido contém instruções de operação em Inglês, Alemão, Francês, Sueco, Espanhol, Italiano, Holandês, Português, Chinês, (Chinês Tradicional e Chinês Simplificado) e Coreano. Leia cuidadosamente todas as instruções de operação antes de operar o projetor. Downloaded From projector-manual.com Sharp Manuals...
  • Page 5 In case of lamp rupture, Lamp ..............64 tion, ensure to secure it carefully to avoid per- recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE Caution Concerning the Lamp ......64 contact your nearest sonal injury caused by the projector falling READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY”...

  • Page 6: Picture

    YEUX ET LA PEAU DES RADIATIONS LORS DES REPARATIONS. This SHARP projector uses a DMD panel. This very sophisticated panel contains 786,432 pixels micromirrors. As with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to.

  • Page 7: How To Read This Operation Manual

    INPUT 3 or INPUT 4. Info ....Indicates safeguards when using the projector..Indicates additional information for setting up and operating the projector. Note For Future Reference Maintenance Troubleshooting Index Page 61 Pages 68 and 69 Page 73 Downloaded From projector-manual.com Sharp Manuals...

  • Page 8: Table Of Contents

    Adjusting the Color Temperature ....... 45 Returning to the Default Settings ....... 59 sRGB Setting ............. 46 Using the “Language” Menu ....... 60 Signal Type Setting ..........46 Selecting the On-screen Display Language ..60 Downloaded From projector-manual.com Sharp Manuals...

  • Page 9: Troubleshooting

    In case of lamp rupture, Lamp ..............64 tion, ensure to secure it carefully to avoid per- recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE Caution Concerning the Lamp ......64 contact your nearest sonal injury caused by the projector falling READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY”...

  • Page 10: Important Safeguards

    20. Safety Check the type of power supply to your home, consult your product • W hen you con * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...

  • Page 11: Troubleshooting

    In case of lamp rupture, Lamp ..............64 tion, ensure to secure it carefully to avoid per- recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE Caution Concerning the Lamp ......64 contact your nearest sonal injury caused by the projector falling READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY”...

  • Page 12: Regarding The Lamp

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...

  • Page 13: How To Access The Pdf Operation Manuals

    SETUP GUIDE Refer to the “SETUP GUIDE” contained on the supplied CD-ROM for details. Screen Size and Projection Distance ... 2 Connecting Pin Assignments ....... 3 RS-232C Specifications and Commands ..4 Dimensions ............. 6 Downloaded From projector-manual.com Sharp Manuals...

  • Page 14: Accessories

    '' (15 cm)) AN-A1RS ■ Lamp unit AN-MB60LP Note • Some of the optional accessories may not be available depending on the region. Please check with your nearest Sharp Authorized Projector Dealer or Service Center. Downloaded From projector-manual.com Sharp Manuals...

  • Page 15: Part Names And Functions

    • Attaching the lens cap Front adjustment foot Push the lens cap on until it clicks (on the bottom of into position. the projector) • Removing the lens cap HEIGHT ADJUST button Pull the lens cap directly outward. Downloaded From projector-manual.com Sharp Manuals...

  • Page 16: About The Indicators On The Projector

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...
  • Page 17 Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 18: Aspect Ratio

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info 1280 ×...

  • Page 19: Using The Remote Control

    In this case, unplug the power cord from the AC outlet, replace the power operation manual of the computer for details. the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 20: Quick Start

    20. Safety Check the type of power supply to your home, consult your product • W hen you con * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info ï...
  • Page 21 On the projector On the remote control " " " " " On-screen Display • • • • • Unplug the power cord from the AC outlet after the cooling fan stops. Page 29 Downloaded From projector-manual.com Sharp Manuals...

  • Page 22: Storing The Projector

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...

  • Page 23: Setting Up The Projector

    Indication of the Projection Image Size and Projection Distance For details, refer to page 2 of the “SETUP GUIDE” contained on the supplied CD-ROM. Example : NORMAL Mode (4:3) Picture Size 300" 200" 100" 84" 60" Downloaded From projector-manual.com Sharp Manuals...

  • Page 24: Projecting A Reversed Image

    • When using a mirror, ensure that both the projector and the mirror are carefully placed so the projected light does not shine into the eyes of the audience. Ceiling-mount Setup ■ It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. Before mounting the projector, contact your nearest Sharp Au- thorized Projector Dealer or Service Center to obtain the recom- mended ceiling-mount bracket (sold separately).

  • Page 25: Connections

    Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to * Mode for projecting Component) nected to the RGB input terminal.

  • Page 26: Samples Of Cables For Connection

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...

  • Page 27: Connecting To A Computer

    In this case, unplug the power cord from the AC outlet, replace the power operation manual of the computer for details. the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 28: Computer Mouse

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info •...

  • Page 29: Connecting To Video Equipment

    Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 30: Setup And Projection

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...

  • Page 31: Controlling The Projector By A Computer

    Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 32: Input Terminal

    • By using external audio components, the volume can be amplified for better sound. • For details on Variable Audio Output (VAO) and Fixed Audio Output (FAO), see page 57. Downloaded From projector-manual.com Sharp Manuals...

  • Page 33: Turning The Projector On/Off

    90 seconds after the projector enters the standby mode. This can cause damage due to rise in internal temperature, as the cooling fan also stops. Unplug the power cord from the AC outlet after the cooling fan stops. Downloaded From projector-manual.com Sharp Manuals...

  • Page 34: Image Projection

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...

  • Page 35: Correcting Trapezoidal Distortion

    Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 36: Adjusting The Focus

    ZOOM buttons on the remote control, or after you have pressed the ZOOM/FOCUS button on the projector, you can display the test pattern by pressing the ENTER button. The test pattern is useful for making more accurate adjustments. Downloaded From projector-manual.com Sharp Manuals...

  • Page 37: Switching The Input Mode

    In this case, unplug the power cord from the AC outlet, replace the power operation manual of the computer for details. the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 38: Displaying The Black Screen And Turning Off The Sound Temporarily

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info 1280 ×...

  • Page 39: Freezing A Moving Image

    GAME PICTURE MODE button Note • You can also use on the projector. • Press to return to the “STANDARD” mode. • This function can also be accessed from the OSD menu (see page 44). Downloaded From projector-manual.com Sharp Manuals...

  • Page 40: Resize Mode

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info 1280 ×...
  • Page 41 Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 42: Menu Items

    *4 Item when inputting RGB signal through INPUT 1 or INPUT 2 Note When using the INPUT 1 or INPUT 2 mode: • “Fine Sync” menu is only displayed when the projector input is INPUT 1 or INPUT 2. Downloaded From projector-manual.com Sharp Manuals...
  • Page 43 Ceiling + Front Page Rear Ceiling + Rear RS-232C 9600 bps 115200 bps Page Monitor Out Enable Disable Page All Reset Page “Language” menu Main Menu Language English Deutsch Page Español Nederlands Français Italiano Svenska Português Downloaded From projector-manual.com Sharp Manuals...

  • Page 44: Using The Menu Screen

    • The menu icon for the selected menu screen is highlighted. Menu icon Menu screen Picture Fine Sync Options1 Options2 Language Note • The “Fine Sync” menu is not available for selecting INPUT 3 or INPUT 4. Downloaded From projector-manual.com Sharp Manuals...
  • Page 45 Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 46: Menu Selections (Settings)

    • The menu icon for the selected menu screen is highlighted. Menu icon Menu screen Picture Fine Sync Options1 Options2 Language Note • The “Fine Sync” menu is not available for selecting INPUT 3 or INPUT 4. Downloaded From projector-manual.com Sharp Manuals...
  • Page 47 ' ' or " " " " " to select the set- ting of the item displayed in the sub menu. Press • The selected item is set. Press • The menu screen will disappear. Downloaded From projector-manual.com Sharp Manuals...

  • Page 48: Picture Adjustment ("Picture" Menu)

    Note on the remote control to select the picture mode. (See page 35.) • “Sharp” can be adjusted when 480I, 480P, 540P, 576I, 576P, 720P, 1035I or 1080I signals are detected while “Signal Type” for INPUT 1 or IN- PUT 2 is set to “Component” or set to “Auto”...

  • Page 49: Emphasizing The Contrast

    Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 50: Srgb Setting

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...

  • Page 51: Computer Image Adjustment ("Fine Sync" Menu)

    “Auto Sync” on the “Fine Sync” menu to “ ” (ON) or pressing on the pro- jector or on the remote control. See next page for details. • To reset all adjustment items, select “Reset” and press Downloaded From projector-manual.com Sharp Manuals...

  • Page 52: Auto Sync Adjustment

    • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjust- ments. (See page 47.) Downloaded From projector-manual.com Sharp Manuals...

  • Page 53: Using The "Options1" Menu

    “Eco Mode” is switched to “ ” (Eco mode) and “ ” (Standard mode). (See page 51.) • The lamp life may vary depending on the usage condition. Downloaded From projector-manual.com Sharp Manuals...

  • Page 54: Setting On-Screen Display

    INPUT 4 mode. • When “Video System” is set to “Auto”, you may not receive a clear picture due to signal differ- ences. Should this occur, switch to video sys- tem of the source signal. Downloaded From projector-manual.com Sharp Manuals...

  • Page 55: Selecting A Startup And Background Image

    * If the input signal has interference, the screen • When “Eco Mode” is set to “ ” (Eco mode), will be displayed during interference. the power consumption will decrease and the lamp life will extend. (Projection brightness de- creases 20%.) Downloaded From projector-manual.com Sharp Manuals...

  • Page 56: Auto Power Off Function

    Displayed on the lower left of the image. (ON), 5 minutes before the projector enters the standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes. Downloaded From projector-manual.com Sharp Manuals...

  • Page 57: System Lock Function

    • If you lose or forget your keycode, contact your the new keycode in “New Code”. nearest Sharp Authorized Projector Dealer or Ser- vice Center (see page 70). Even if the product war- ranty is valid, the keycode reset will incur a charge.

  • Page 58: Keylock Function

    • When the projector is in standby mode, you can release the mote control buttons. keylock by holding down on the projector for about 3 sec- • You cannot use the keylock function while the projector is warming up. onds. Downloaded From projector-manual.com Sharp Manuals...

  • Page 59: ("Options2" Menu)

    Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 60: Auto Keystone Setting

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...

  • Page 61: Setting The Audio Output Type

    Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 62: Selecting The Transmission Speed (Rs-232C)

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...

  • Page 63: Returning To The Default Settings

    Menu operation Page Example: “Options2” screen menu Note The following items or menu cannot be initialized. • “Fine Sync” menu Special Modes • “Options1” menu Lamp Timer (Life) System Lock • “Language” menu Downloaded From projector-manual.com Sharp Manuals...

  • Page 64: Using The "Language" Menu

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info •...
  • Page 65 In this case, unplug the power cord from the AC outlet, replace the power operation manual of the computer for details. the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 66: Setup And Projection

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...
  • Page 67 Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.
  • Page 68 (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...
  • Page 69 Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.

  • Page 70: Resetting Lamp Timer

    (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info •...

  • Page 71: Computer Compatibility Chart

    In this case, select either INPUT 3 (Video) or INPUT 4 (S-Video). Signal Horizontal Frequency (kHz) Vertical Frequency (Hz) 15.7 480P 31.5 540P 33.8 15.6 576P 31.3 720P 45.0 1035 28.1 1035 33.8 1080 28.1 1080 33.8 Downloaded From projector-manual.com Sharp Manuals...

  • Page 72: Troubleshooting

    The projector cannot be • The keylock is set. turned on or put into the If the keylock is set to ON, all the buttons are locked. standby mode using the ON or STANDBY button on the projector. Downloaded From projector-manual.com Sharp Manuals...
  • Page 73 Press the mark on the cover and the cooling fan may Using S-Video (commercially available or available as Sharp service part QCNWGA038WJPZ) Press on the remote control to Component) nected to the RGB input terminal.
  • Page 74 (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...

  • Page 75: Specifications

    (UDSKAA053WJZZ), “QUICK GUIDE” label (TLABZA793WJZZ), Operation manual (TINS- B526WJZZ) As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 76 (commercially available) 20. Safety Check the type of power supply to your home, consult your product * If the new lamp does not illuminate after replacement, take your projector to the nearest Sharp Authorized Pages 23, 29 MENU button Info http://www.sharpkorea.co.kr...
  • Page 77 V-Pos ..............47 Lamp ..............64 Zoom buttons ............32 Lamp indicator ............. 62 ZOOM/FOCUS button ......... 32 Lamp Timer (Life) ..........49 Language (on-screen display language) ..39,60 L-CLICK/ENTER button ........24,40 Lens cap .............. 11 Downloaded From projector-manual.com Sharp Manuals...

  • Page 78: Sharp Corporation

    SHARP CORPORATION Downloaded From projector-manual.com Sharp Manuals...

Table of Contents