Using Tls In Vista - ZyXEL Communications NWD2205 User Manual

Chapter 4 Station Mode
Note: If you are not sure what to enter, contact your network administrator.
Click OK. The Enter Credentials screen disappears and the NWD2205 tries to
7
connect to the network. The ZyXEL utility's Link Info screen displays, showing
the connection status (see
displays an active connection, you have successfully completed the procedure.

4.7.2 Using TLS in Vista

Take the following steps to set up WPA, WPA2 or 802.1x security using TLS in
Windows Vista.
Either select the AP to which you want to connect in the Site Survey screen (see
1
Section 4.4 on page
normal way.
In the WPA, WPA2 or 802.1x security screen, select TLS as the EAP Type. Note
2
that the Login Name, Certificate and Validate Server Certificate fields are
greyed-out (not available).
Click Next.
3
In the Summary screen, click Save.
4
A message similar to the following appears in the bottom-right of your screen.
5
Click the message.
Figure 50 Vista Security: Additional Information Required
The Select Certificate screen displays. Select the certificate you want to use in
6
order to authenticate with the server, and enter your username.
Figure 51 Vista Security: Select Certificate
72
Section 4.3 on page
54), or configure a profile (see
51). If the Link Info screen
Section 4.5 on page
NWD2205 User's Guide
62) in the