The following table describes the operation of the NWD2205's LEDs.
Table 2 NWD2205 LEDs
LED
COLOR
Amber
1.3 Application Overview
This section describes some network applications for the NWD2205. You can either
set the network type to Infrastructure and connect to an AP or use Ad-Hoc
mode and connect to a peer computer (another wireless device in Ad-Hoc mode).
1.3.1 Infrastructure
To connect to a network via an access point (AP), set the NWD2205 network type
to Infrastructure (see
the Internet or the wired network behind the AP.
Figure 2 Application: Infrastructure
NWD2205 User's Guide
STATUS
DESCRIPTION
Slow
The NWD2205 is turned on, connected to an AP, and is
Blinking
not transmitting or receiving data.
Rapid
The NWD2205 is turned on, connected to an AP, and is
Blinking
transmitting or receiving data. It also blinks when the
WPS feature is being used or a WPS connection is being
initiated.
Off
The NWD2205 is turned off.
Chapter 4 on page
Chapter 1 Getting Started
62). Through the AP, you can access
19