ZyXEL Communications NWD2205 User Manual page 66

Chapter 4 Station Mode
If you selected Infrastructure network type in the first screen, select WEP,
3
WPA, WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to
enable data encryption. If you selected Ad-Hoc network type in the first screen,
you can use only WEP encryption method. Otherwise, select DISABLE to allow
the NWD2205 to communicate with the access points or other peer wireless
computers without any data encryption, and skip to step 5.
Figure 41 Profile: Wireless Settings
The screen varies depending on the encryption method you select in the previous
4
screen. The settings must be exactly the same on the AP or other peer wireless
computers as they are on the NWD2205. Refer to
detailed information on wireless security configuration.
Figure 42 Profile: Security Settings
66
Section 5.4.1 on page 80
NWD2205 User's Guide
for