Wep Encryption - ZyXEL Communications NWD2205 User Manual

Chapter 4 Station Mode
Table 8 Security Setting: WEP (continued)
LABEL
Next
Exit

4.4.1.2 WEP Encryption

Configure WEP security in this screen.
Figure 33 Security Setting: WEP
The following table describes the labels in this screen.
Table 9 Security Setting: WEP
LABEL
Security
Settings
WEP
Authentication
Type
Pass Phrase
Transmit Key
56
DESCRIPTION
Click Next to confirm your selections and advance to the Security
Settings screen that corresponds to the one you select here.
Click Exit to return to the Site Survey screen without saving.
DESCRIPTION
Select 64 bits or 128 bits to activate WEP encryption and then fill in
the related fields.
Select an authentication method. Choices are OPEN and SHARED.
Refer to Section 3.3.1.1.2 on page 40
Enter a passphrase of up to 32 case-sensitive printable characters. As
you enter the passphrase, the NWD2205 automatically generates four
different WEP keys and displays the first in the key field below. Refer to
Section 3.3.1.1.1 on page 39
Select a default WEP key to use for data encryption. The key displays in
the adjacent field.
for more information.
for more information.
NWD2205 User's Guide