ZyXEL Communications NWD2205 User Manual page 60

Chapter 4 Station Mode
Note: The procedure to configure 802.1x is different in Windows Vista. See
4.7 on page 70
Vista.
Figure 36 Security Setting: 802.1x
The following table describes the labels in this screen.
Table 12 Security Settings: IEEE 802.1x
LABEL
Encryption Type Select WEP if the access point is configured to use 802.1x with WEP
EAP Type
Login Name
Password
Certificate
TTLS Protocol
60
for information on setting up your NWD2205 to use 802.1x in
DESCRIPTION
encryption. A dynamic WEP key is generated automatically.
The type of authentication you use depends on the RADIUS server or
AP.
Select an authentication method from the drop down list. Options are
TLS, PEAP and TTLS (at the time of writing, TTLS is not available in
Windows Vista).
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS
server.
This field is not available when you select TLS in the EAP Type field or
the PEAP Inner EAP field.
Enter the password associated with the user name above.
This field is available only when you select TLS in the EAP Type field.
Click Browse to select a certificate.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
This field is available only when you select TTLS in the EAP Type field.
Select a TTLS protocol that the RADIUS server uses. Options are CHAP,
MS-CHAP, MS-CHAP-V2 and PAP.
Note: This feature is not available on Windows Vista.
Section
NWD2205 User's Guide