ZyXEL Communications NWD2205 User Manual page 81

Table 22 Security Setting: WEP (continued)
LABEL
Pass Phrase
Key 1-4
Save
Cancel
5.4.1.3 WPA-PSK/WPA2-PSK
Configure WPA-PSK and WPA2-PSK security with these options.
Figure 58 Security Setting: WPA-PSK/WPA2-PSK
NWD2205 User's Guide
DESCRIPTION
If you select this transmit key option, enter a passphrase of up to 32
case-sensitive printable characters.
As you enter the passphrase, the NWD2205 automatically generates
four different transmit keys and displays the first in the key field below.
Select this option if you want to manually enter a transmit key. Enter
the key in the field provided.
If you select 64 bits in the WEP field.
Enter either 10 hexadecimal digits in the range of "A-F", "a-f" and "0-
9" (for example, 11AA22BB33) for HEX key type.
or
Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z"
and "0-9" (for example, MyKey) for ASCII key type.
If you select 128 bits in the WEP field,
Enter either 26 hexadecimal digits in the range of "A-F", "a-f" and "0-
9" (for example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z"
and "0-9" (for example, MyKey12345678) for ASCII key type.
Note: The values for the WEP keys must be set up exactly the
same on all wireless devices in the same wireless LAN.
ASCII WEP keys are case sensitive.
Click to save the changes.
Click to discard the changes.
Chapter 5 AP Mode
81