StarTech.com 110VDSLEXT Instruction Manual
10/100 vdsl ethernet lan extender kit over single pair wire
Hide thumbs
Also See for 110VDSLEXT:
- User manual (11 pages) ,
- Instruction manual (11 pages) ,
- Instruction manual (11 pages)
Subscribe to Our Youtube Channel
Related Manuals for StarTech.com 110VDSLEXT
Summary of Contents for StarTech.com 110VDSLEXT
- Page 1 110VDSLEXT 110VDSLEXTGB 110VDSLEXTEU Instruction Manual VDSL Ethernet LAN Extender 10/100 VDSL Ethernet LAN Extender Kit over Single Pair Wire...
- Page 2 StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an en- dorsement of the product(s) to which this manual applies by the third-party company in question.
-
Page 3: Table Of Contents
Table of Contents Introduction ..............1 Package Contents ...............1 Installation ............... 1 Hardware Installation ..............1 Operation ................. 2 LED Displays ................2 DIP Switch Settings ..............2 Connector Architecture ...............5 Specifications ..............6 Technical Support ............7 Warranty Information ............7... -
Page 4: Introduction
1 x Instruction Manual Installation Hardware Installation Install one of the 110VDSLEXT / GB / EU units with all four of the DIP switches set to the upward (OFF) position. This places the unit in CO mode. Install the second 110VDSLEXT / GB / EU unit with DIP switches 2 through 4 set to the upward (OFF) position and DIP switch 1 set to the downward position (ON). -
Page 5: Operation
Offline Quickly: Training DIP Switch Settings The 110VDSLEXT / GB / EU has a 4-position DIP switch for configuration of Side, Channel, Rate Limit, and SNR. Pin 1 - CO, CPE Switch OFF: If Pin 1 is in the OFF position, the 110VDSLEXT / GB / EU will operate in Central Office (CO) mode. - Page 6 Pin 2 - Interleave Noise Protection OFF: If Pin 2 is in the OFF position, the 110VDSLEXT / GB / EU will operate in Interleave mode, with communication protection for up to 250ms of impulse noise with latency less than 6 ms...
- Page 7 Pin 4 - General Protection OFF: If Pin 4 is in the OFF position, the 110VDSLEXT / GB / EU will operate with a SNR ratio up to 9 dB. ON: If Pin 4 is in the ON position, the 110VDSLEXT / GB / EU will...
-
Page 8: Connector Architecture
Connector Architecture Ethernet Port Pin Number Assignment (MDI-X) RX+; Receive data + RX-; Receive data - TX+; Transmit data + Not used Not used TX-; Transmit Data - Not used Not used VDSL Port Assignment (MDI-X) Pin Number Not used Not used Not used ANALOG Input/Output... -
Page 9: Specifications
Specifications 110VDSLEXT 110VDSLEXTGB 110VDSLEXTEU • RJ-45 connector • Complies with IEEE LAN Interface 802.3/802.3u/802.3x • 10/100 Base-T Auto- Negotiation, Auto-MDI/MDI-X • RJ-45 connector • DMT Encoding VDSL Interface • Complies with ITU-T G993.1/993.2 • On-board surge protection DIP Switch 4 position •... -
Page 10: Technical Support
Technical Support StarTech.com’s lifetime technical support is an integral part of our com- mit-ment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our com- prehensive selection of online tools, documentation, and downloads. - Page 11 StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Serv-...
Need help?
Do you have a question about the 110VDSLEXT and is the answer not in the manual?
Questions and answers