Integrated Peripherals; Figure 3.5:Integrated Peripherals (1); On-Chip Primary/Secondary Pci Ide; Ide 1St/2Nd Mstr/Slave Pio/Udma Modes (Auto) - Advantech PCA-6184 User Manual

3.6 Integrated Peripherals

Figure 3.5: Integrated peripherals (1)

3.6.1 On-Chip Primary/Secondary PCI IDE

If you enable IDE HDD Block Mode, the enhanced IDE driver will be
enabled. Leave IDE HDD Block Mode on the default setting.

3.6.2 IDE 1st/2nd Mstr/Slave PIO/UDMA Modes (Auto)

Each channel (Primary and Secondary) has both a master and a slave,
making four IDE devices possible. Because each IDE device may have a
different Mode timing (0, 1, 2, 3, 4), it is necessary for these to be inde-
pendent. The default setting "Auto" will allow autodetection to ensure
optimal performance.

3.6.3 USB Controller

This should be enabled if your system has a USB installed on the system
board and you want to use it. Even when so equipped, if you add a higher
performance controller, you will need to disable this feature. The choice:
Enabled, Disabled.

3.6.4 USB Keyboard Support

Select Enabled if your system contains a Universal Serial Bus (USB) con-
troller and you have a USB keyboard. The choice: Enabled, Disabled.

3.6.5 Onboard FDC Controller

33