Section 9: Installing The Accessories - Montigo RP620 Installation & Maintenance Manual

Section 9: Installing Accessories
Firestone / Fireglass Installation
The RP620* is supplied with eight 3 lbs bags of glass firestones. Once
the trim and glass door is removed, place the firestones randomly
around the burners as shown in Figures 23 and 23a. Fireglass
installation is the same as firestones.
Note: DO NOT cover the pilot with firestones or any other
media.
Place.one.layer.of.firestones.in.burner.tray
Figure 23.
Figure 23a..Do.not.place.any.firestones.on.top.of.the.pilot.cover..
Figure 23b..Completed.firestone.installation
XG0777 - 100113.1
Installation
Optional Speckled Stones
The RP620* has the option of installing the Speckled Stones which
mimic real stone. These may be spaced evenly across the burner
and/or light tray. See the Montigo web site for photographs and ideas.
www.montigo.com
The RP620* requires 2 sets of Speckled Stons (RR150SS) to cover
the burner and an additional 2 sets to cover the light tray.
Note: DO NOT cover the pilot with Speckled Stones or any
other media.
Do not operate this fireplace without the glass doors or with a broken glass door.
RP620 Power Vent Indoor Gas Fireplace
NOTICE
Page 31