Turn On Progressive Scan - Philips DVDR5570H User Manual

Turn on Progressive Scan

When you connect a TV with the component
video connection (see 'Connect audio/video
cables - Option 3: Connect to component
video socket' for details), you can set the
progressive scan output if your TV supports
progressive scan.
1
Turn on the TV to the correct viewing
channel for this recorder.
• Ensure that the progressive scan mode
on your TV is turned off or set it to
'Interlaced' mode (see the TV user
manual).
2
Turn on the recorder and press
OPTIONS.
Audio language
Subtitle language
Time search
Reset TSB
Settings
3
Select [ Settings ] > [ Video output ], then
press B.
4
Select [ Active video output ] > [ Comp.
video (YUV) ], then press OK.
Language TV shape
Recording Active video output
Playback Video format
Video Output
HDMI
Audio Black level
Analogue tuner Vertical
Digital tuner
Setup
• This is to activate the video output for
component video connection.
5
Select [ Video format ] > [ Progressive ],
then press OK.
Language TV shape
Recording Active video output
Playback
Video format
Video Output
HDMI
Audio Black level
Analogue tuner Vertical
Digital tuner
Setup
• This is to activate the progressive scan
mode.
6
Read the warning message on the TV. To
proceed, select [ Apply ] in the menu and
press OK.
The progressive setup is complete.
• If a blank/distorted screen is displayed,
wait for 15 seconds for the auto
recover.
• If no picture is displayed, disconnect this
unit's ~MAINS. Then press and hold
. on the recorder whilst connecting
its ~MAINS to the power supply.
7
To exit the menu, press OPTIONS.
8
You can now turn on the progressive scan
mode on your TV (see the TV user
manual).
Note
•
There are some progressive scan TVs that are
not fully compatible with this unit, resulting in an
unnatural picture when playing back a DVD VIDEO
disc in the progressive scan mode. In such case, turn
off the progressive scan feature on both the recorder
and your TV.
EN 23