Connect Other Devices - Philips DVDR5570H User Manual

Connect other devices

This section describes how to connect this
recorder to other devices with
recommendations for the most used cases.
Other solutions may be possible, depending on
the capabilities of the devices.
Connect to an AV amplifi er/receiver
You can listen to the audio from this recorder
through a digital audio device. It allows you to
enjoy multichannel surround sound output.
DIGITAL
ANTENNA INPUT
ANTENNA INTERCONNECT CABLE
DIGITAL ANTENNA
(OPTIONAL, REFER TO MANUAL) LOOP THROUGH
CVBS-OUT
TO TV EXT 1 TO VCR/SAT EXT 2
S-VIDEO
1
Connect a coaxial cable (not supplied)
from the COAXIAL DIGITAL OUT
socket on this recorder to the digital/
coaxial input socket on the device.
• Select the digital audio output setting
according to the type of audio that the
device can output (see 'Audio settings'
> [ Digital input ] for details).
Tip
•
The digital coaxial input socket on the device may be
labelled as COAXIAL IN or DIGITAL IN.
HDMI
OUT
Y P
B
L
P
R
R
COAXIAL
AUDIO COAXIAL COMPONENT
DIGITAL
OUT DIGITAL OUT VIDEO OUT
OUT IN
Connect to Cable Box/Satellite
Receiver
This recorder supports 5.1 multi-channel input
signal. The 5.1 multi-channel surround output
from the Cable Box/Satellite Receiver can be
recorded onto this recorder, along with the
video.
AUDIO OUT
Y P
B
P
R
COMPONENT
VIDEO OUT
DIGITAL
ANTENNA INPUT
ANTENNA INTERCONNECT CABLE DIGITAL ANTENNA
(OPTIONAL, REFER TO MANUAL) LOOP THROUGH
TO TV TO VCR/SAT EXT 2
EXT 1
ANALOG
ANTENNA INPUT
1
Plug in the scart adaptor (supplied) to the
EXT2-TO VCR/SAT socket on this
recorder.
2
Connect the Audio/Video cables (supplied)
to the scart adaptor and the other ends to
the audio and video output sockets on
your Cable Box/Satellite Receiver.
3
Connect a coaxial cable (not supplied)
from the COAXIAL DIGITAL IN socket
on this recorder to the digital/coaxial
output socket on your Cable Box/Satellite
Receiver.
• To prepare this recorder for 5.1 multi-
channel recording (see 'Set up 5.1
multi-channel recording' for details).
• To view the video input, press CAM
and followed by P +/- until 'EXT 2'
is displayed.
COAXIAL
VIDEO OUT
DIGITAL OUT
S-VIDEO OUT
OPTICAL
OUT
HDMI
OUT
CVBS-OUT
Y P
B
L
P
R
R
COAXIAL
AUDIO COAXIAL COMPONENT
S-VIDEO DIGITAL
OUT DIGITAL OUT VIDEO OUT IN
OUT
EN 17