Philips DVDR5570H User Manual page 22

Automatic Channel search
will find and store all
channels. Make sure to
connect the antenna!
Previous Start
6
Select the type of TV signal source to
install, then press the OK.
Channel search and install begin. It takes
a few minutes to complete.
Digital channel search
Searching channels.
This may take a few minutes. Please wait.
Digital TV channels found: 3
Digital channel search
Digital channel search completed
Digital TV channels found: 9
Digital Radio channels found: 3
Next
• If [ No TV install ] is selected, you will
not be able to record TV programme
through this recorder.
7
After the channel search is complete, press
the Green button [ Next ] to continue.
[ Time ] menu is displayed.
Time setting is required for
making recordings.
Enter time (hh.mm)
Previous Next
22 EN
Channel Search
Full installation
Only Analogue TV
Only Digital TV
No TV install
Restart ChkSignal
Time
00 00 AM
8
(or the alphanumeric buttons)
Press
to input the correct time, then press OK.
[ Date ] menu is displayed.
Date setting is required to
make recordings. Please
make sure it is correct.
Enter date (dd.mm.yyyy)
Previous Next
9
(or the alphanumeric buttons)
Press
to input the correct date, then press OK.
10
The installation is now complete. Press the
Green button [ Done ] on the remote
control to close the menu.
Installation Complete
You have successfully completed the installation
of your recorder.
System is now ready for use.
Previous Done
The DVD recorder is now ready for use.
Tip
•
Press the Red button on the remote control to
return to the previous screen or press the Green
button to proceed to the next installation step.
Date
31 01 2007