Connect video/audio cables
This section describes how to connect this
recorder to your TV so to enable you to view
the playback from this recorder.
Before you start, select the best video
connection that your TV can support.
•
Option 1: Connect to video (CVBS) socket
(for a standard TV).
•
Option 2: Connect to S-video socket (for a
standard TV).
•
Option 3: Connect to component video
socket (for a standard TV or Progressive
Scan TV).
•
Option 4
Connect to HDMI socket (for a
:
HDMI, DVI or HDCP-compliant TV).
Note
•
Scart connector (EXT1-TO TV) on this recorder
cannot be used in this region.
•
You must connect this recorder directly to a TV.
•
If your TV has a digital audio input socket, you can
replace the analogue audio connection with digital
audio connection in order to enjoy multi-channel
surround sound output.
EN
14
Option 1: Connect to Video (CVBS)
socket
DIGITAL
ANTENNA INPUT
HDMI
OUT
TAL ANTENNA
P THROUGH
CVBS-OUT
Y
L
VCR/SAT
EXT 2
R
AUDIO
COAXIAL
S-VIDEO
OUT
DIGITAL OUT
OUT
1
Connect a composite video cable (yellow -
supplied) from the CVBS OUT socket on
this recorder to the video input socket on
your TV.
2
Connect the audio cables (red/white -
supplied) from the AUDIO OUT sockets
on this recorder to the audio input sockets
on your TV.
•
Alternatively, you may replace the
audio connection with COAXIAL
DIGITAL OUT (cable not supplied).
Tips
•
The video input socket on your TV may be labelled
as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
•
This type of connections provide standard picture
quality.
P
B
P
R
COAXIAL
COMPONENT
DIGITAL
VIDEO OUT
IN
TV