Connect to VCR or other similar
device
VHF/UHF
AUDIO
RF IN
VHF/UHF
RF OUT
DIGITAL
HDMI
ANTENNA INPUT
OUT
NNA INTERCONNECT CABLE
DIGITAL ANTENNA
ONAL, REFER TO MANUAL)
LOOP THROUGH
CVBS-OUT
L
EXT
1
TO VCR/SAT
EXT
2
R
S-VIDEO
OUT
1
Plug in the scart adaptor (supplied) to the
EXT2-TO VCR/SAT socket on this
recorder.
2
Connect the Audio/Video cables (supplied)
to the scart adaptor and the other ends to
the audio and video input sockets on your
VCR.
•
Alternatively, you may replace the video
connection with S-VIDEO (cable not
supplied).
To view the video input, press CAM
•
followed by P +/- repeatedly until
'EXT 2' is displayed.
Note
•
Your new recorder can replace the VCR for all your
recording needs. Just unplug all the connections to
your VCR.
•
Most commercial video tapes and DVDs are copy-
protected and therefore cannot be recorded.
18
EN
OUT
VIDEO OUT
S-VIDEO OUT
Y
P
B
P
R
COAXIAL
AUDIO
COAXIAL
COMPONENT
DIGITAL
OUT
DIGITAL OUT
VIDEO OUT
IN
Connect to digital video/digital 8
camcorder
1
Flip down the cover at the right hand
corner of this recorder.
2
Connect an i.LINK 4-pin cable (not
supplied) from the DV IN socket on this
recorder to the DV OUT socket on the
camcorder.
•
To view the video input, press CAM to
select 'CAM2'.
Note
•
It is not possible to record or copy the titles or fi les
from this recorder to your camcorder.
Tip
•
This type of connections provide best picture quality.