Select audio mode for digital
recording
If you want to record a TV programme that
transmits full cinema surround sound (Dolby
Digital, DTS surround or DTS ES, Dolby Digital
EX) from the digital terrestrial or the Cable
Box/Satellite Receiver, turn on the multi-
channel audio record mode before you record.
Note
•
Multi-channel recordings from digital terrestrial tuner
can only be played back on this recorder.
•
Multi-channel recording is only possible in HQ and
SP record mode.
1
Press OPTIONS.
2
Select [ Settings ], then press B.
3
Select [ Recording ] > [ DTT audio
recording ], then press B.
[ Stereo ]
Disable digital audio input. Record audio
in stereo mode.
[ Multichannel ]
Record audio in multi-channel mode.
4
Select a setting, then press OK.
•
To return to the previous menu, press
BACK
.
•
To exit the menu, press OPTIONS.
Record live TV
Each TV programme can record up to 6 (six)
hours as one recorded title. Recording
exceeded every six hours will be recorded as a
new title.
1
Turn on the recorder to live TV mode.
2
Use the remote control to record the
current TV programme.
Button
Action
Start recording.
Set the length of recording.
•
30 minutes increment at
each press, up to 6 hours.
Stop recording at the
current position.
Cancel recording.
(Red button)
Tip
•
You can turn off your TV and the recorder to
standby while recording.
EN
31