Picture; Sound - Philips DVDR5570H User Manual

Picture

No picture.
JPEG photos cannot be
displayed.
No picture on HDMI
connection.

Sound

No sound.
The connected amplifi er
produces distorted sound.
No surround sound output
on HDMI connection.
78 EN
• Turn on your TV and to the correct Video In channel for the
recorder. You may go to Channel 1 (or the lower channel) on
your TV, then press the channel down button on your TV until
you see the recorder's built-in live TV broadcast.
• Check the video connection between this recorder and the TV.
• This unit only supports pictures in JPEG-Exif fi le format, using
4:2:2 or 4:2:0 chroma subsampling, with a resolution not
exceeding 4096 x 4096 (horizontal/vertical). JPEG pictures that
download from the internet or have been modifi ed using
computer may not be able to display properly.
• Ensure that the active video output matches the connection
(see 'Adjust settings - Video output settings > [ Active video
output ]').
• Ensure that the HDMI video resolution of this recorder matches
the capabilities of the connected TV/device (see 'Adjust settings
- Video output settings').
• Check if the HDMI cable is faulty. Replace a new HDMI cable.
• Check the audio connections.
• Set the Analogue output or Digital output correctly based on
the device you have connected to this recorder. See chapter
'Adjust settings - Audio settings' for details.
• Do not connect any cables from this recorder to the 'Phono'
input of your amplifi er.
• When you play a DTS source, connect the amplifi er to the
COAXIAL/OPTICAL DIGITAL OUT socket of this recorder. If
the amplifi er does not support DTS, it may produce distorted
sound.
• It depends on your TV audio capabilities. In this case, connect
COAXIAL/OPTICAL OUT of this recorder to your TV, then
turn off the HDMI audio setting (see 'Adjust settings - Audio
settings > [HDMI audio ]').