Philips DVDR5570H User Manual page 33

Use G- system
CODE
To schedule recordings with the G-
system, enter the G-
CODE
corresponds to the programme you want to
record. You can fi nd the programme number
in the local TV listings.
1
Press G- .
CODE
G- Number
CODE
Enter G- number :
CODE
2
Press the alphanumeric buttons to enter
the G- number. (e.g. 5-312-4 or
CODE
5,3124, key in '53124').
• To clear the number, press the Red
button [ Clear ].
• To cancel the programme and exit the
menu, press the Yellow button
[ Cancel ].
3
Press the Green button [ Store ] to store
the entry.
A message to enter channel list is
displayed.
4
Select [ OK ] in the menu, then press OK.
New timer
Start time 08:30AM
Stop time 09:30AM
Date 16/01/07
Source Analogue
Channel P05
Title name ABC
Repeat Once
Recording target DVD
Clear All Store
CODE
number that
Start time
08 : 30 : AM
Enter time (hh.mm)
Cancel
5
To change the recording settings, select the
respective fi eld and press B.
Repeat
[ ]
Select a repeat recording setting.
• [ Once ] : no repeat.
• [ Daily ] : repeat everyday.
• [ Weekly ] : repeat once in a week.
• [ Mon~Fri ] : repeat from Monday to
Friday.
Recording target
[ ]
Select to store this recording to the HDD
or a recordable DVD.
6
Select a new setting, then press OK.
7
Once complete, press the Green button
[ Store ] to confi rm the timer recording.
8
To exit, press G-
CODE
The ' ' icon lights up on the display
TIMER
panel if a timer recording is set.
.
EN 33