Connect; Connect Video/Audio Cables - Philips BDP7500 MK II User Manual

u
INFO
Display the current status or the disc
information.
v
OPTIONS
Access options for the current activity or
selection.
w Color buttons
: Select tasks or options.
x HDMI
Select the video resolution of HDMI
output.
y REPEAT

3 Connect

Make the following connections to use this product.
Video
Audio
Power
Optional connections:
Route audio to other devices
Analog stereo system
Wired/Wireless network
Note
Refer to the type plate at the back or bottom of the
Before you make or change any connections, ensure that
all the devices are disconnected from the power outlet.

Connect video/audio cables

Select the best video connection that the TV can
support.
Option 1: Connect to the HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to the component video
jacks (for a standard TV or Progressive Scan TV).
Option 3: Connect to the composite video
jack (for a standard TV).
8 EN
Option 1: Connect to the HDMI jack
1
Connect an HDMI cable (not supplied) to:
the HDMI jack on this product.
the HDMI input jack on the TV.
Tip
If the TV has a DVI connector only, connect via an HDMI/
DVI adaptor. Connect an audio cable for sound output.
If there is a blank screen under HDMI connection, on the
remote control press
buttons) to recover picture display.
If this product connects to a TV compatible with 1080p
or 1080p/24Hz, Philips recommends HDMI category 2
cable, also known as High Speed HDMI cable, for optimal
video and audio output.
To play the digital video images of a BD-video or DVD-
video via an HDMI connection, it is necessary that both
this product and the display device (or an AV receiver/
HDCP (high-bandwidth digital content protection system).
This type of connection provides best picture quality.
Option 2: Connect to the component
video jack
Y Pb Pr
1
Connect the component video cables
(not supplied) to:
HDMI IN
and then press "731" (numeric
AUDIO IN