Assembly Instructions - Member's Mark BQ05051-3 Manual

This page will give you an overview of information to assemble your grill. The following pages will show in
step-by-step detail how to do so. We offer the following suggestions to make your grill assembly as easy as
possible.
1.) Read through the entire Assembly Instructions before you begin.
2.) Choose an area large enough to comfortably lay out all the parts and hardware with enough room to easily
maneuver.
3.) Have an area with a non-abrasive surface where you can lay parts without scratching them.
4.) Use 2 people to remove the Cabinet and Firebox Assembly from the carton.
5.) Lay all parts and hardware out and ensure you have everything listed on the Parts and Hardware page before
you begin assembly. See the Customer Support Page for contact information should any parts be damaged or
missing.
6.) A Phillips Head Screwdriver has been provided for assembly.
7.) Do not use a Power Screwdriver for assembly as you could strip the threads on the Nuts and Bolts.
8.) The propane tank for this grill is sold separately. See the LP Gas and Cylinder Information later in this
guide.
!
WARNING
Failure to follow all Danger,
Warnings, and For Your Safety
notices in this Grill Guide may
result in serious bodily injury or
death, or in a fire or an explosion
causing damage to property.
!
CAUTION
Perform the Leak Test explained
later in this Grill Guide before
operating your grill.

Assembly Instructions

BQ05051-3
5