Table of Contents
Advertisement
1 x Driver CD
1 x User Manual
1 x Fan Out Cable
Note: Contents may vary depending on country/market.
Chapter 2: Getting Started
2.1 Hardware Installation
1.
Turn off the power to your computer.
2.
Unplug the power cord and remove your computer's cover.
3.
Remove the slot bracket from an available PCI slot.
4.
To install the card, carefully align the card's bus connector with
the selected PCI slot on the motherboard. Push the board down
firmly.
5.
Replace the slot bracket's holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.
Power for the Powered RS-232 DB9 connectors are supplied from
4-pin connector located on the PCB. This connectors allows a PC
MN2000000198
Page 5
Advertisement
Table of Contents
