What You Need To Get Started; Table 1-1. Pxi-6711/6713 J2 Pin Assignment - National Instruments 6711 User Manual

which is compatible with any CompactPCI chassis with a sub-bus that does
not drive these lines. Even if the sub-bus is capable of driving these lines,
the 6711/6713 is still compatible as long as those pins on the sub-bus are
disabled by default and are never enabled. Damage can result if these lines
are driven by the sub-bus.

What You Need to Get Started

To set up and use the 671X device, you will need the following:
© National Instruments Corporation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table 1-1. PXI-6711/6713 J2 Pin Assignment

6711/6713 Signal PXI Pin Name
RTSI Trigger <0..5> PXI Trigger <0..5>
RTSI Trigger 6 PXI Star Trigger
RTSI Clock PXI Trigger (7)
Serial LBR (6, 7, 8, 9, 10,
Communication 11, 12)
Either the 6711, 6713, or 6715 device
6711/6713/6715 User Manual
NI-DAQ driver for PC compatibles version 6.5 or higher (6.7 or higher
for DAQCard-6715)
One of the following software packages and documentation:
– LabVIEW for Windows
– LabWindows/CVI for Windows
– ComponentWorks
– VirtualBench
– C language compiler
Your computer
SH68-68 EP cable (PCI/PXI/CompactPCI-6711/13 and
DAQPad-6713)
1-3
Chapter 1 Introduction
PXI J2 Pin Number
B16, A16, A17,
A18, B18, C18
D17
E16
EI5, A3, C3, D3, E3,
A2, B2
6711/6713/6715 User Manual