Assembly Instructions - Life & Home GPC2700JB Owner's Manual

Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is
fully assembled, go back check and make certain all the bolts are tighten. Tighten again by the screwdriver provided if it is
necessary.
Estimated Assembly Time: It will takes less than 40 minutes to assembly the grill.
Step 2
Align the hole in bottom plate (2) with the hole in right
bottom frame(3) and in the left bottom frame (5).
Screw a bolt (C) along with a lock washer (D) and a flat
washer(G) into each pre-drilled hole.
Align the hole in front bottom panel (4) with the hole in
right bottom frame(3) and in the left bottom frame (5).
Screw a bolt (A) along with a lock washer (D) and a flat
washer(E) into each pre-drilled hole.
Align the hole in wheel(7)with the hole in right bottom
frame (3) and then insert the wheel axe (6) into the
hole ,and then seal with a wheel nut(H) .
Cover a wheel cap (8)on each wheel .
GPC2700JB
Owner's Manual

Assembly Instructions

8
Step 1
Align the holes on the cylinder support(1) with the
holes on the bottom plate(2) ,screw a bolt(A) into
each pre-dilled hole.
And then seal with a flat washer(E),together with a
lock washer(D) and a nut(F)
tighten by the screwdriver.