Assembly Instructions
For Best Results
Remove all contents from packaging, and make sure all parts are present before attempting to assemble!
Tighten all bolt connections by hand first, then when the grill is fully assembled, go back and tighten.
Step 2
Align each hole in bottom hinge
(10)with the hole in the base ,screw a
bolt (B),together with a
into each pre-drilled hole.Then seal
with a flat washer( I ), a lock washer
(G)and a wing nut (D).
Tighten by screwdriver until secure .
GST1912L
Owner's Manual
heat resistant washer(E)
Step 1
Unfold legs from the bottom of the base(2)
Step 5
Put burner(14) into the grill body(2) ,make
certain the venturi tube of the burner should
go through the grill body hole toward the left
body handle .
Align the hole in brill body with the hole in
burner ,screwing a bolt(B),together with a
lock washer (E) and a flat washer (G) into
the pre-drilled hole .
Tighten by screwdriver until secure.
7