Assembly Instructions - Life & Home GSF2616JB Owner's Manual

Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once
the grill is fully assembled, go back and check to make certain all the bolts are tight. Tighten again with the
screwdriver provided if it is necessary.
Estimated Assembly Time: It will take less than 40 minutes to assemble the grill
Step 2
Align the holes on right foot (6) with the
holes on leg R-F(1) and leg L-B( 3)
respectively .
Screw a M6x16mm bolt (A) into each
pre-drilled hole. Tighten by hand until
secure. Align the holes on left foot (5)
with the holes on leg L-F(2) and leg
R-B( 4) respectively . Screw a
M6x16mm bolt (A) into each pre-
drilled hole. Tighten by hand until
secure. Go back and tighten with the
screwdriver provided.
GSF2616JB
Owner's Manual

Assembly Instructions

Step 1
Align the holes on the cart front panel (10)
with the holes on the leg R-F( 2)
Screw a M6x16mm bolt (A) into each
pre- drilled hole.
Tighten by hand until secure.
Repeat the procedure for the leg L-F( 1).
Go back and tighten with the screwdriver
provided.
7