Aming A M Emory C Hannel - Kenwood TH-255A Instruction Manual

Note:
◆ Call Channel data cannot be cleared.
◆ You can also clear the Priority Channel, and L0/U0 ~ L2/U2
channels.
◆ While the transceiver is in Channel Display Mode or Lock function
is activated, you cannot clear the channel data.
N m
amiNg a emory
You can name memory channels using up to 6 alphanumeric
characters. When you recall a named memory channel, its name
appears on the display in place of the stored frequency. Names can
be call signs, repeater names, cities, names of people, etc. In order
to use the Memory Name function, the memory channel capacity
must be set to 50 channels. To change the memory channel
capacity from 100 to 50, access Menu No. 4 (M.CH).
1 Press [MR], then rotate the Selector (or press [UP]/ [DOWN])
to select your desired memory channel.
2 Enter Menu mode and access Menu No. 5 (M.NAME).
3 Press [MENU].
• A blinking cursor appears.
4 Rotate the Selector (or press [UP]/ [DOWN]) to select a desired
alphanumeric character.
• You can enter the following alphanumeric characters:
0 ~ 9, A ~ Z,-(hyphen), / (slash), and a space.
• Press [CALL] to delete the character at the current cursor
position.
5 Press [MENU].
• The cursor moves to the next digit.
6
Repeat steps 4 and 5 to enter up to 6 digits.
• To complete the entry, press [MENU] without selecting a
character.
32
C
haNNel