Memory.channels; N Umber Of M Emory C Hannels - Kenwood TH-255A Instruction Manual

In memory channels, you can store frequencies and related data
that you frequently use so that you do not need to reprogram that
data every time. You can quickly recall a programmed channel
through simple operation. A total of 100 memory channels (50
when using the Memory Name function) are available for storing
frequencies, modes and other operating conditions.
N m
umber of emory
The transceiver must be configured to either 100 memory channels
without using the Memory Name function or 50 memory channels
with the Memory Name function (default).
To change the memory channel capacity:
1 Enter Menu mode and access Menu No. 4 (M.CH).
2 Press [MENU], then rotate the Selector (or press [UP]/ [DOWN])
to select "50" or "100".
3 Press [MENU].
• "SURE ? " appears.
4 Press [MENU] to accept.
5 Press any key other than [MON], [UP]/ [DOWN] or [ ] to exit
Menu mode.
Note:
◆ If you change the memory channel capacity from 100 channels to 50
channels after having stored data in channels 50 to 99, all memory
channel data in channels 50 to 99 will be erased.
26
MEMORY CHANNELS
C
haNNels