C Hannel D Isplay M Ode - Kenwood TH-255A Instruction Manual

• The separate transmission frequency is stored in the Call
Channel.
Note:
◆ When you recall an odd-split Call Channel, " " and " " appear on
the display.
◆ Transmit offset status and Reverse status are not stored in an odd-
split Call Channel.
C d
haNNel isplay
While in this mode, the transceiver displays only memory channel
numbers (or Memory names if they have been stored) instead of
frequencies.
Press [PTT] + [MR] + Power ON.
• The transceiver displays the memory channel number in place of
the operating frequencies.
To recover normal operation, turn the transceiver OFF and press
[PTT] + [MR] + Power ON again.
• The following transceiver keys cannot be used while in Channel
Display mode:
• [MENU]/ [VFO]
• [F] then [VFO] (Memory to VFO transfer)
• [F] then [MR] (Storing Memory channel)
• [VFO] (1s) (Band scan) / [7] (1s) (ASC)
• [PTT] + [F] + Power ON (Full reset)
• [VFO] + Power ON (VFO reset)
• [MR] + Power ON (Clearing Memory channel)
Note:
◆ To enter the Channel Display Mode, you must have at least one
memory channel that contains the data.
◆ If the memory channel contains the Memory name data, the
Memory name is displayed in place of the "CH" characters.
m
ode
35