Basic Operations; S Witching P Ower On/Off; A Djusting The V Olume; T Ransmitting - Kenwood TK-5720 User Manual

S p
wiTching ower
Press and hold
Press and hold
■ Transceiver Password
If the transceiver is password protected, "PASSWORD" will appear on the
display when the power is turned ON. To unlock the transceiver, enter the
password:
1 Select a character using
• If you are using a microphone keypad, you can enter the password by direclty.
2 Press
to enter the selected character.
• This step is unnecessary when using the keypad.
3 Repeat steps  and 2 to enter the entire password.
• Press
characters.
4 Press or
• If you enter an incorrect password, an error tone sounds and the transceiver
remains locked.
• The password can contain a maximum of 6 digits.
A v
djuSTing The
Press the keys programmed as Volume Up/ Volume Down to adjust the volume
level.
S Z
elecTing A one And
Select the desired zone using the keys programmed as Zone Up/ Zone Down.
Each zone contains a group of channels.
Select the desired channel using the keys programmed as Channel Up/
Channel Down. Each channel is programmed with settings for transmitting and
receiving.
• You can toggle the display between the zone and channel names and numbers by
pressing the key programmed as Display Format, or by accessing the Menu {page 9}.
T
rAnSmiTTing
1 Select the desired zone and channel.
2 Press the key programmed as Monitor or Squelch Off to check whether or
not the channel is free.
• If the channel is busy, wait until it becomes free.

BASIC OPERATIONS

on/oFF
for approximately  second to turn the transceiver power ON.
again to turn the transceiver OFF.
/ .
or # to delete a character. Press and hold
to confirm the entry.
olume
c
hAnnel
or # to delete all