v
Hold
Press the hold key v while on a call to place the call on hold. While a call is on hold, and
•
if there are no other active calls, the LED flashes at the hold rate and the display presents the
Call is on Hold prompt. In addition, a held call reminder tone is played in the form of a short
ring burst (flash ring).
Release Key ( y)
The release key is a multi-purpose key with the following uses:
•
To end a call.
•
To silent the ringing during an incoming call.
•
To exit feature such as Menu (options), Directory, Callers, Redial, Predial.
Mute Key (
Use the mute key when you want to be able to hear a caller but have them not hear you. Press the
æ key to mute the handset. Press the æ key again to disengage mute. The "Microphone Mute"
prompt displays when mute is activated.
Redial Key (
The Redial key displays a list of the last 10 calls made from the handset. Use the Ï and  to
scroll through the list.
Feature Key List (
The 6757i CT cordless handset supports a programmable feature key list for easy access to
common features. The available features include line keys (1-9), intercom, directory, callers list,
transfer, conference, and public/private call mode. For more information about the feature keys,
see
"Feature Keys on the Handset"
222
Key
Note:
The handset is equipped with an auto-hold feature. While on an active call,
pressing any other line key results in the current line being placed on hold and the
new line being seized.
Note:
You can also place the handset in the charger cradle to end the call.
Note:
Pressing this key in a feature does not terminate an active call.
æ
)
ß
)
Ï
)
on
page 217.
Model 6757i CT IP Phone User Guide