Aastra 6757i CT User Manual page 101

Expansion Module Keys
7. Select from "Key 1" through "Key 36" (M670i)
or
Select from "Key 1" through "Key 60" (M675i)
8. (M675i) In the "Label" field, enter a label to apply to this ACD key.
9. In the "Line" field, select a line to apply Automatic call distribution. Valid values are 1
through 9.
10. Click Save Settings.
Using the ACD Feature on your IP Phone
The ACD feature allows you to login to a phone queue in order to receive distributed calls on
your IP phone. To login to a phone queue, you must preconfigure an ACD softkey or expansion
module key on your IP Phone as described in the previous procedure.
Your Administrator sets up the queue that you access when you press the ACD Key. Contact
your System Administrator for more information.
When you press the ACD Key, the phone prompts you to enter a User ID and Password to login
into the queue. Once logged in, you can make your phone "available" or "unavailable" to take
calls by pressing the Available/Unavailable Key (
When you set the IP phone to "available," the server begins distributing calls to your phone.
When you set the IP phone to "unavailable," the server temporarily stops distributing calls to
your phone.
The LED for the ACD Key shows the current status of your phone.
ACD LED Table
This LED changes when you log into the phone queue and are available to take calls. The LED
changes again when you are busy with an active call. The table below shows the status of the
LED as they may appear on your IP phone.
Phone
Model
6757i CT
94
Status: Logged In
and Available Status: Unavailable Logged Out
Solid Red LED Blinking Red LED
icon Blinking
). The server monitors your IP phone status.
No LED
icon icon
Model 6757i CT IP Phone User Guide