Aastra 6757i CT User Manual page 202

Custom - The Custom mode allows you to configure CFWD for a specific account or all
•
accounts. You can configure a specific state (All, Busy, and/or No Answer) for each account
independently or all accounts.On the 6757i CT, you can set all accounts to All On, All Off, or
copy the configuration for the account in focus to all other accounts using a CopytoAll
softkey.
10. Click Save Settings.
The changes takes affect immediately without a reboot.
11. Click on Basic Settings->Account Configuration.
The illustration above shows 3 accounts configured on the phone. Accounts must be set up by
your System Administrator.
12. For each account, enable the CFWD state by placing a check mark in one or more of the
following "State" fields:
•
•
•
The "All" option forwards all incoming calls for this account to the specified phone number
regardless of the state of the phone. The phone can be in the Busy or No Answer states, or can
be in the idle state. The phone still forwards all calls to the specified number.
The "Busy" option call forwards incoming calls only if the account is in the busy state. The
calls are forwarded to the specified phone number.
Model 6757i CT IP Phone User Guide
Note:
If there is only one account configured on the phone, then the mode setting is
ignored and the phone behaves as if the mode was set to "Phone".
All
Busy
No Answer
195