Maintenance; Recommended Maintenance Schedule(S) - Exmark Laser Z XS Operator's Manual

Maintenance

Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
WARNING
While maintenance or adjustments are being
made, someone could start the engine.
Accidental starting of the engine could
seriously injure you or other bystanders.
Remove the key from the ignition switch and
engage parking brake, before you do any
maintenance.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
After the first 100 hours
After the first 250 hours
Before each use or daily
Every 40 hours
Every 50 hours
Every 100 hours
Every 160 hours
Every 200 hours
Every 500 hours
Maintenance Procedure
• Change the engine oil.
• Check the wheel hub slotted nut torque specifications.
• Check the wheel lug nuts.
• Change the hydraulic filter.
• Check the engine oil level.
• Check the mower blades.
• Check the safety interlock system.
• Check the rollover protections systems (roll bar) pins.
• Check the seat belt.
• Check for loose hardware.
• Check engine coolant level.
• Clean the engine cooling system.
• Remove accumulated debris from engine.
• Clean the grass build-up from under the deck.
• Check the hydraulic oil level.
• Check the tire pressures.
• Check the condition of the belts.
• Grease the height adjustment shaft bearings.
• Grease the rear deck struts.
• Service the air cleaner. (May need more often under severe conditions. See the Engine
Owner's Manual for additional information.)
• Change the engine oil. (May need more often under severe conditions.)
• Drain fuel filter.
• Lubricate the brake handle pivot.
• Lubricate the brake rod bushings.
• Lubricate the motion control bronze bushings.
• Grease the brake brackets.
• Check the wheel hub slotted nut torque specifications.
• Check the wheel lug nuts.
WARNING
The engine can become very hot. Touching
a hot engine can cause severe burns.
Allow the engine to cool completely before
service or making repairs around the engine
area.
28