Dimensions - Exmark Laser Z XS Operator's Manual

Specifications
• Armrests: Molded adjustable flip-up armrests.
• Seat Safety Switch: Incorporated into the
Safety Interlock System. Time delay seat switch
eliminates rough ground cut-outs.
Hydrostatic Ground Drive System
• Hydrostatic Pumps: Two Hydro Gear PW
variable displacement piston pumps.
• Wheel Motors: Two Parker/Ross with 1 1/4 inch
tapered shafts.
• Hydraulic Oil Type: Use Mobil 1 15W-50
Synthetic motor oil.
• Hydraulic Oil Capacity: 5.5 qt. (5.2 L)
• Hydraulic Filter: Replaceable cartridge type.
P/N 103-2146: 25 microns, No bypass
• Speeds:
– 0-12.0 mph (19.3 km/hr) forward.
– 0-8.0 mph (12.9 km/hr) reverse.
• Drive wheel release valves allow machine to be
moved when engine is not running.
Tires & Wheels
Drive
Pneumatic
(Air-Filled)
Deck Size 60, 66, & 72
Quantity 2
Tread Size "Multi-Trac
C/S"
Size 26 x 12.00-12
Ply Rating 4
Pressure 10 psi (69 kPa)
Cutting Deck
• Cutting Width:
– 60 inch (152.4 cm)
– 66 inch (167.6 cm)
– 72 inch (182.9 cm)
• Discharge: Side
• Blade Size: (3 ea.)
– 60 inch Deck: 20.75 inches (52.7 cm)
– 66 inch Deck: 22.75 inches (57.8 cm)
• Blade Spindles: Solid steel spindles with 1.18 inch
• Deck Drive:
• Deck:
• Deck Depth:
• Cutting Height Adjustment:
Front Caster
Semi-Pneumatic
All Decks
2
Smooth
13 x 6.50-6
• Mulching Kit: Optional.

Dimensions

Overall Width:
Without
Deck
Deflector
Up
Deflector
Down
18
– 72 inch Deck: 24.75 inches (62.9 cm)
(30 mm) I.D. bearings.
– Electric clutch mounted on horizontal engine
shaft. "B" Section belt (with self-tensioning
idler) from electric clutch to transfer shaft
mounted on deck.
– Blades are driven by one "B" Section belt
(w/self-tensioning idler) from transfer shaft
on deck to blade spindles.
Full floating deck is attached to out-front support
frame. Six anti-scalp rollers provide maximum
turf protection. Deck design allows for bagging,
mulching or side discharge.
– 60 inch Deck: 6.0 inches (15.2 cm)
– 66 inch Deck: 6.0 inches (15.2 cm)
– 72 inch Deck: 6.0 inches (15.2 cm)
An extra-long cushioned lever is used to adjust
the cutting height from 1 inch (2.5 cm) to 5 inches
(12.7 cm) in 1/4 inch (6.4 mm) increments. The
cutting height adjustment handle has a transport
position and all adjustments can be made while
the operator remains seated. Units also have a
foot operated deck lift assist lever to aid in raising
the deck.
60 inch
Deck
53.5 inches
(135.9 cm)
61.4 inches
(156.0 cm)
72.8 inches
(184.9 cm)
66 inch 72 inch
Deck Deck
57.3 inches 61.5 inches
(145.5 cm) (156.2 cm)
68.0 inches 74.3 inches
(172.7 cm) (188.7 cm)
79.4 inches 85.8 inches
(201.7 cm) (217.9 cm)