Tower Setup - Eaton Powerware 5125 User Manual

Tower Setup

The setup varies depending on the number of cabinets you are installing:
1. For one cabinet, the pedestals must be installed. Continue to Step 2.
For two or more cabinets, the joining brackets must be installed. Skip
to Step 6.
2. Place the UPS cabinet horizontally so that the left end of the cabinet
is accessible (see Figure 7).
3. Slide and align the UPS pedestals with the screw holes on the end
of the UPS cabinet. Secure the pedestals with the screws provided
in the accessory kit.
4. Carefully position the cabinet upright with the air vents at the top
(see Figure 8).
5. Continue to "Installing the UPS" on page 22 to complete the
installation.
®
EATON Powerware 5125 Two-in-One UPS (1000–1500 VA) User's Guide
Figure 7. Installing the UPS Pedestals
Figure 8. UPS with Pedestals
S
05147305 Rev D www.power-
INSTALLATION
Air Vents
19
ware.com