Configuring Vpn Passthrough - Cisco RV180 Administration Manual

Configuring VPN and Security
Configuring Advanced VPN Parameters
STEP 4
STEP 1
Cisco RV180/RV180W Administration Guide
- Username—Enter the username for user authentication. For QuickVPN, it
must include at least 6 characters.
- Password—Enter the password for user authentication. For QuickVPN, it
must include at least 6 characters.
- Allow User to Change Password—Check the box if you want the user
to be able to change the password. Otherwise, uncheck the box.
- Protocol—Choose the type of user:
QuickVPN—The user uses the Cisco QuickVPN client and is
authenticated by the VPN server.
PPTP—The user is authenticated by a PPTP server.
XAUTH—The user is authenticated by an external authorization server,
such as a RADIUS server.
• To edit a client, check the box and then click Edit. To select all entries, check
the box in the heading row. Then edit the information, as described above.
• To delete a client, check the box and then click Delete. To select all entries,
check the box in the heading row.
Click Save to save your settings, or click Cancel to reload the page with the
current settings.
.

Configuring VPN Passthrough

VPN passthrough allows VPN traffic that originates from VPN clients to pass
through the router. For example, if you are not using a VPN that is configured on the
Cisco RV180/RV180W, but are using a laptop to access a VPN at another site,
configuring VPN passthrough allows that connection.
To open this page: In the navigation tree, choose VPN > IPsec > VPN
Passthrough.
Choose the type of traffic to allow to pass through the router:
• IPsec—Check Enable to allow IP security tunnels to pass through the router.
• PPTP—Check Enable to allow Point-to-Point Tunneling Protocol tunnels to
pass through the router.
5
123