Ipsec Connection Status - Cisco RV180 Administration Manual

Viewing the Cisco RV180/RV180W Status

IPsec Connection Status

NOTE
IPsec Connection Status
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV180/RV180W Administration Guide
Errors
Dropped
Multicast
Collisions
The counters are reset when the device is restarted.
The IPsec Connection Status page displays the status of IPsec connections.
To view the status of IPsec connections:
Choose Status > IPsec Connection Status.
Click Stop.
In the Poll Interval field, enter the number of seconds the router waits before
updating the information on this page.
Click Start to restart automatic refresh at the specified poll interval.
You can change the status of a connection to either establish or disconnect the
configured SAs (Security Associations).
Policy Name
Endpoint
Kbytes
Packets
The number of received/sent packet errors
reported to the radio, over all configured APs.
The number of received/sent packets dropped by
the radio, over all configured APs.
The number of multicast packets sent over this
radio.
The number of packet collisions reported to the AP.
The name of the IKE or VPN policy associated with
this SA.
Displays the IP address of the remote VPN
gateway or client.
The data transmitted (in KB) over this SA.
The number of IP packets transmitted over this SA.
8
167