Getting To Know The Cisco Rv180W; Front Panel; Cisco Rv180/Rv180W Administration Guide - Cisco RV180 Administration Manual

Introduction

Getting to Know the Cisco RV180W

Getting to Know the Cisco RV180W

Cisco RV180/RV180W Administration Guide

button for at least 20 seconds. This will restore the factory defaults and
clear all of the Cisco RV180 settings.
We recommend that you back up your current configuration before
NOTE
resetting the device to the factory default settings. See
Restoring the System, page
LAN Ports (1-4)—These ports provide a LAN connection to network devices,
such as PCs, print servers, or additional switches.
WAN Port—The WAN port is connected to your Internet device, such as a cable or
DSL modem.
ON/OFF Power Switch—Press this button to turn the Cisco RV180 on and off.
When the button is pushed in, power is on.
Power Port—The power port is where you connect the AC power cable.

Front Panel

POWER—The Power LED lights up green to indicate the device is powered on. It
flashes green when the power is coming on or software is being upgraded.
151.
1
Backing Up and
5